Xbee USB adapter (FTDI ready)

SKU:DFR0050

INTRODUCTION

The upgraded DFRobot Xbee USB adapter is designed for the XBee module configuration parameters to facilitate using or to

work as a FTDI writer. The new version of Xbee USB adapter is also welded with the female pin for FTDI so that users can

directly use the adapter as a FTDI program writer, such as Arduino FIO/pro/mini、lilypad Arduino and so on. It's a must-have

for interactive electronic installations and projects.

The adapter allows the PC to configure XBee / Bluetooth module and the controller / development board for wireless data

transmission via mini USB cable. You can upload your program through the wireless controller module, or conduct wireless real-

time data transmission. The adapter uses a FTDI232 USB-UART converter chip to ensure stable and reliable data transmission.

FEATURES



Used for the XBee module configuration parameters



Easily connected to a PC via mini USB cable



XBee-setting support software X-CTU



Also used as a USB-TTL adapter



Voltage: +5V(USB Power)

 

 

Powered By DFRobot © 2008-2017