| 数据搜索系统,热门电子元器件搜索 |
|
L9680 数据表(PDF) 41 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
L9680 数据表(HTML) 41 Page - STMicroelectronics |
|
41 / 286 page ![]() DS11615 Rev 7 41/286 L9680 Start-up and power control 285 Figure 13. ERBOOST regulator state diagram 6.4 Energy reserve capacitor charging and discharging circuits The energy reserve capacitor connected to VER pin can be charged in an efficient way by means of a current generator. Its capability is 65 mA nominal, so that for example a 10 mF capacitor can be charged in approximately 4 s to 24 V. The current generator is activated or deactivated by SPI command only while in ACTIVE mode. When not in ACTIVE mode, the generator is always switched off in order to decouple ERBOOST node voltage from VER reserve voltage. Figure 14. ER charge state diagram L9680 also offers a safe control to discharge the ER capacitor by means of a fixed current generator. This discharge can be controlled via SPI command while not in SLEEP mode. Furthermore, this discharge circuit is mutually exclusive with the ER charging circuit, to avoid inefficient way of controlling the charge on the VER energy reserve capacitor. ER BST ON (Active_mode = 1 AND VBATMON > VBGOOD) OR (ER_state=1 AND SYS_CFG(KEEP_ERBST_ON)=1) AND VIN > VINGOOD AND SYS_CTL(ER_BST_EN)=1 AND GNDBOOST_loss = 0 AND ERBST_OT=0 AND ERBST_DISABLE=0 Default SYS_CTL(ER_BST_EN) = 1 at POR = 1 [(Active_mode = 0 OR VBATMON < VBBAD) AND (ER_state=0 OR SYS_CFG(KEEP_ERBST_ON)=0)] OR VIN < VINBAD OR SYSCTL(ER_BST_EN) = 0 OR GNDBOOST_loss = 1 OR ERBST_DISABLE=1 ER BOOST power mode control ER BST OFF ERBST_OT=1/ ER BST OT SPI_FLTSR READ AND ERBST_OT=0 ERBST_OT=1 ER BST STBY SPI_SYS_CTL(ER_BST_EN=1) AND ERBST_OT=0 POWER-OFF_MODE OR SLEEP_MODE GAPGPS02259 Active_mode = 1 AND SYS_CTL(ER_CUR_EN[1:0]) = 01 AND “ER CAP ESR DIAG not in progress” Active_mode = 0 OR SYS_CTL(ER_CUR_EN[1:0]) 01 SSM_Reset ER CHARGE ON ER CHARGE OFF ERCHARGE_OT=1 ER CHARGE OT ER CHARGE STBY Default SYS_CTL(ER_CUR_EN[1:0]) = 00 at SSM_RESET = 1 ERCHARGE_OT=1 SPI_SYS_CTL(ER_CUR_EN[1:0]) = 01 AND ERCHARGE_OT=0 SPI_FLTSR READ AND ERCHARGE_OT=0 power mode control ER Charge GAPGPS02260 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |