PRODUCT SPECIFICATION

Part

Number

USB3106

Rev

A

Date

03/12/13

Product

Description

Micro USB Receptacle, Type A/B, Vertical, Through-Hole with

2.30mm (Standard) Shell Stakes

Page

3 

Doc

Number

USB3106-SPEC

Prepared

AO

Checked

RM

Approved

VJ

 

 

 

www.gct.co

6.1 Electrical Performance.

Item

Test Condition

Requirement

Low-signal Level

Contact Resistance

Subject mated contacts assembled in

housing to 20mV Max open circuit at

100mA Max. In accordance with

EIA-364-23.

30 mΩ max.

Insulation Resistance

Mate/Un-mate connectors, apply

100V DC for 1 minute between adjacent

terminal or ground. In accordance with

EIA-364-21.

1000 MΩ min.

Dielectric Withstanding

Voltage

The dielectric must withstand 100VAC for

one minute.

In accordance with EIA-364-20.

No Breakdown

Temperature Rise

Mated plugs and measure the

temperature rise of contact when the

maximum rated current is passed.

In accordance with EIA-364-70

30°C max change allowed

6.2 Mechanical Performance.

Item

Test Condition

Requirement

Mating Force

Operation Speed: 12.5 mm/min.

Measure the force required to mate

connector. In accordance with

EIA-364-13.

35N max.

Un-mating Force

Operation Speed: 12.5mm/min.

Measure the force required to unmate

connector. In accordance with

EIA-364-13.

Initial: 10N min.

Final: 8N min.

25N max.

Durability

Operation Speed: 500 cycle/Hour

(automatically) or 200 cycle/Hour (manual

cycle) Durability Cycles: 10,000 Cycles

In accordance with EIA-364-09.

Appearance: No breakdown

Mating force: 35N maximum.

Un-mating force: 8N minimum.

25N max

LLCR: 30 mΩ max.

Vibration

Mated USB connectors are subjected to

5.35 GRMS. 15minutes in each of three

mutually perpendicular planes.

In accordance with EIA-364-28

Test Condition V Test Letter A

Appearance: No Damage

Contact Resistance:

10 mΩ max change allowed.

Discontinuity: 1.0 microsecond

max.