4 - PCB MECHANICAL SPECIFICATIONS

92.0mm

35.1mm

5mm

10.9mm

10.9mm

5mm

CN2

CN3

CN1

31

50

1

3

4mm

3.3mm

CN1 & CN2 : JAE IL-3PL-SMTY-E1500

CN3 : JAE IL-FHR-50S-HF-E3000

Figure 3

101.4mm

P 0.3 x (324-1) x 0.9991 = 96.81279 W = 0.15

P 0.25961 x (326-1) = 84.37325 W = 0.1

1.25mm

1.2mm

4.7mm

Ø 0.5mm

2.25

1.15

0.15

0.4 0.4 0.4

PCB

Bonding

LCD

Bonding

1.4

3.75

FPC specifications (UPILEX otherwise thermal expansion specified)

Cu Foil : 35

m m

Ni Plating : > 1

m m

Au Plating : > 0.1

m m

Design values :

Conductor width = 0.15 ± 0.04

Gap width = 0.15 ± 0.04

Figure 4

The rigid board is 92mm long by 30mm wide.

The rigid board can be mounted on the mechanical

chassis of the plasma panel or on a heat sinker by

clips and/or screws.

The recommended size of the heat sinker depends

on the final application if data drivers are powered

with a DC or an AC supply.

copper surface in order to spread the current on the

board and reduce voltage drops and EMI.

5 - FPC MECHANICAL SPECIFICATIONS

6 - STV7699 SPECIFICATIONS

6.1 - Features

- 64 outputs plasma display driver

- 170V absolute maximum supply

- 5V supply for logic

- 50/40mA source / sink output

- 60/60mA source / sink output diode

- 64-bit shift register (20MHz)

- BLK, polarity and HIZ control

- BCD technology

6.2 - General Description

The STV7699 is a Plasma Display Panel (PDP) data

driver implemented in ST’s proprietary BCD technol-

ogy. Using a 4-bit wide cascadable shift register,

it drives 64 high current & high voltage outputs.

By serialy connecting several STV7699, any hori-

zontal pixel definition can be performed. The 20MHz

shift clock gives an equivalent 80MHz shift register.

The STV7699 is supplied with a separated 170V

power output supply and a 5V logic supply. All com-

mand inputs are CMOS compatible.

CM17699

5/11