10 Device and Documentation Support

10.1 Receiving Notification of Documentation Updates

To receive notification of documentation updates, navigate to the device product folder on ti.com. Click on

Notifications to register and receive a weekly digest of any product information that has changed. For change

details, review the revision history included in any revised document.

10.2 Support Resources

TI E2E™ support forums are an engineer's go-to source for fast, verified answers and design help — straight

from the experts. Search existing answers or ask your own question to get the quick design help you need.

Linked content is provided "AS IS" by the respective contributors. They do not constitute TI specifications and do

not necessarily reflect TI's views; see TI's Terms of Use.

10.3 Trademarks

TI E2E™ is a trademark of Texas Instruments.

All trademarks are the property of their respective owners.

10.4 Electrostatic Discharge Caution

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled

with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may

be more susceptible to damage because very small parametric changes could cause the device not to meet its published

specifications.

10.5 Glossary

TI Glossary

This glossary lists and explains terms, acronyms, and definitions.

11 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from Revision I (May 2016) to Revision J (June 2025)

Page

• Updated the numbering format for tables, figures, and cross-references throughout the document................. 1

• Changed supply current per channel specification at V+ = 2.7V from 100μA to 150μA (typical) and from

170μA to 200μA (maximum at 25°C)..................................................................................................................6

• Changed supply current per channel specification at V+ = 5V from 100μA to 150μA (typical).......................... 7

• Changed recommended shutdown pin voltage range, shutdown mode specification at V+ = 2.7V from 0.8V to

0.2V (maximum)................................................................................................................................................. 8

• Changed recommended shutdown pin voltage range, shutdown mode specification at V+ = 5V from 0.8V to

0.2V (maximum)................................................................................................................................................. 8

Changes from Revision H (June 2012) to Revision I (May 2016)

Page

• Added ESD Ratings table, Feature Description section, Device Functional Modes, Application and

Implementation section, Power Supply Recommendations section, Layout section, Device and

Documentation Support section, and Mechanical, Packaging, and Orderable Information section................... 1

• Removed Ordering Information table ................................................................................................................ 1

12 Mechanical, Packaging, and Orderable Information

The following pages include mechanical, packaging, and orderable information. This information is the most

current data available for the designated devices. This data is subject to change without notice and revision of

this document. For browser-based versions of this data sheet, refer to the left-hand navigation.

www.ti.com

LMV341, LMV342, LMV344

SLOS447J – SEPTEMBER 2004 – REVISED JUNE 2025

Copyright © 2025 Texas Instruments Incorporated

Submit Document Feedback

19

Product Folder Links: LMV341 LMV342 LMV344