 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
IS25LE128E-RMLA3:P-TY 数据表(PDF) 36 Page - Integrated Silicon Solution, Inc |
|
|
|||||||||||||||||||||||||||||
IS25LE128E-RMLA3:P-TY 数据表(HTML) 36 Page - Integrated Silicon Solution, Inc |
|
|
36 / 197 page  IS25LE256E/128E IS25WE256E/128E Integrated Silicon Solution, Inc.- www.issi.com 36 Rev.A9 03/07/2023 6.5 BANK ADDRESS REGISTER Related Commands: Read Volatile Bank Address Register (RDBR 16h/C8h), Write Volatile Bank Address Register (WRBRV 17h/C5h), Write Non-Volatile Bank Address Register (WRBRNV 18h), Enter 4-byte Address Mode (EN4B B7h), and Exit 4-byte Address Mode (EX4B 29h). Bank Address Register Bit (8 bits) definitions are described in Table 6.17 and Table 6.18. Table 6.17 Bank Address Register Bit Table BA7 BA6 BA5 BA4 BA3 BA2 BA1 BA0 EXTADD Reserved Reserved Reserved Reserved Reserved Reserved BA24 Default 0 0 0 0 0 0 0 0 Table 6.18 Bank Address Register Bit Definition Bit Name Definition Read- /Write Type BA0 BA24 Enables 128Mb segment selection in 3-byte addressing "0" indicates lower 128Mb segment is selected. "1" indicates upper 128Mb segment is selected. “Reserved” in 128Mb. R/W Non-Volatile and Volatile BA1 Reserved Reserved R Reserved BA2 Reserved Reserved R Reserved BA3 Reserved Reserved R Reserved BA4 Reserved Reserved R Reserved BA5 Reserved Reserved R Reserved BA6 Reserved Reserved R Reserved BA7 EXTADD 3-byte or 4-byte addressing mode selection Bit: "0" indicates 3-byte addressing mode "1" indicates 4-byte addressing mode R/W Non-Volatile and Volatile BA24: The Bank Address Register supplies additional high order bits of the main flash array byte boundary address for legacy commands that supply only the low order 24 bits of address. The Bank Address is used as the high bits of address (above A23) for all 3-byte address commands when EXTADD=0. The Bank Address is not used when EXTADD = 1 and traditional 3-byte address commands are instead required to provide all four bytes of address. EXTADD: Extended Address (EXTADD) controls the address field size for legacy SPI commands. When shipped from factory , it is cleared to “0” for 3-byte addressing mode. When set to “1” for 4-byte addressing mode, the legacy commands will require 4 bytes of address for the address field |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
