Particulates

FILTER

HAZARD

INDUSTRY

5911 P1 R

Particulates

- Pharmaceutical /

5925 P2 R

(Fine Dusts

Powdered Chemicals

5935 P3 R

and Mists)

- Construction / Quarrying

2125 P2 R

- Ceramics / Refractory Materials

2135 P3 R

- Foundries

6035 P3 R

- Agriculture

(EN143

- Woodworking

:2000)

- Food Industry

2128 P2 R

Particulates

- Welding

2138 P3 R

and nuisance - Paper Industry

(EN143

levels of

- Brewing

:2000)

Organic

- Chemical Processing

Vapours and

- Typical Smog

Acid Gases

- Inks and Dyes

Approvals

The 3M 6000 Series full face masks and 6000 / 5000 / 2000

Series filters have been shown to meet the Basic Safety

Requirements under Article 10 and 11 B of the European

Community Directive 89/686, and are thus CE-marked.

• Approval body for the facepieces:

BSI identification number 0086

• Body involved in Quality Assurance Assessment:

BSI identification number 0086

Materials

• Facepiece

-

Silicone

• Head Harness

-

Silicone Rubber

• Inhale Valve

-

Natural Rubber

• Exhale Valve

-

Silicone Rubber

• Gasket

-

Silicone Rubber

• Filter Body (6000)

-

Polystyrene

• Filter Element (6000)

-

Activated/Treated Carbon

• Filter Material (5911 /

-

Polypropylene

5925 / 5935 and 2000 Series)

• Lens

-

Polycarbonate

Maximum Product Weight:

- With filters

850 grams

- Without filters

410 grams

Standards

These products have been tested to the relevant European

Standards (EN136 (class I), EN141, EN143, EN371, EN14387) and

have met the requirements shown below:

• Facepiece EN136 (6700, 6800, 6900)

• Filter Performance EN143:2000

(5911, 5925, 5935, 6035, 6038, 2000 Series)

EN141:2000 (6054, 6057, 6059, 6075, 6096, 6099)

EN371 (6098)

EN14387:2004 (6051, 6055)

• Flammability EN136 (6700, 6800, 6900)

• Visor - Eye protection to EN166:2001 B. Protection against

medium energy high speed particles (120m/s).

Correct Usage

The 6000 Series full facepieces when fitted with 6000 Series gas

/ vapour filters may be used in concentrations of gases or

vapours (types specified by 3M) up to 20 times WEL* or 1000

ppm (5000 ppm for 6055 / 6099) whichever value is lower (APF =

20)**. Gas / vapour filters should not be used to protect the

wearer against a gas or vapour that has poor warning properties

(smell or taste).

• The 6000 Series full facepieces when used in conjunction with

the 5911 filter may be used in concentrations of solid and

aqueous aerosols up to 4 times WEL (APF = 4).

• The 6000 Series full facepieces when used in conjunction with

the 5925, 2125, or 2128 filters may be used in concentrations

of particulates up to 10 times WEL (APF = 10).

• The 6000 Series full facepieces when used in conjunction with

the 5935, 2135, 6035, 6038, or 2138 may be used in

concentrations of particulates up to 40 times WEL (APF = 40).

• The 6000 Series full facepieces when used in conjunction with

the 2128 and 2138 may be used to protect against ozone up to

10 times WEL (APF = 10) and offer relief from nuisance odours

and acid gases below the WEL.

• The 6000 Series facepieces when used with the 6038 filter

may be used to protect against Hydrogen Fluoride gas up to

30ppm and offer relief from Ozone, Organic Vapours and acid

gases below WEL.

• The 6000 Series full facepieces when used in conjunction with

the 6075 filter may be used to protect against organic vapours

as outlined above and against formaldehyde vapour up to 10

times WEL (APF = 10).

• For use limitations on 6000 Series full facepieces fitted

with 6098 filters, please contact 3M.

*WEL - Workplace Exposure Limit

** APF - Assigned Protection Factor

6038 P3 R

(EN143

:2000)

Aluminium

Agriculture

Pharmaceutical

Welding

Particulates,

Hydrogen

Fluoride Gas

up to 30ppm

and relief

from Ozone,

Organic

Vapours and

Acid Gases

below WEL