PUNCH-ROD datasheet(3/164 Pages) TEC

3 / 164 page

INDUSTRIAL & COMMERCIAL TRANSPORTATION /// CONNECTOR SELECTOR

PAGE 3

PERFORMANCE SPECIFICATIONS

AMPSEAL CONNECTORS

Current:

Up to 17 amps gold, up to 8 amps tin

Temperature:

Operating at temperatures -40°C to +125°C for gold plated, -40°C to +105°C for tin plated

Durability:

Mate and unmate specimens for 10 cycles at maximum rate of 600 cycles per hour. See note.

Physical Shock:

No discontinuities of 1 microsecond or longer duration. TE Spec 109-26-1. Subject mated specimens to 50 G’s half-sine shock pulses of

11 milliseconds duration. Three shocks in each direction applied along 3 mutually perpendicular planes, 18 total shocks. See Fig 5 in TE

product document 108-1329.

Insulation Resistance:

100 megohms minimum. TE Spec 109-28-4. Test between adjacent contacts of mated specimens.

Immersion:

Leakage current not to exceed 50 micro-amperes at 48 volts DC. TE Spec 109-74-5. Immerse specimens to a depth of 100 mm in 5% salt

water at a temperature of 23 ± 5° C for 1 hour. Check between adjacent circuits and each surface to reference electrode.

Random Vibration:

TE Spec 109-21-7, Condition G, except 10-500 Hz frequency range. Subject mated specimens to 10 Gs for 8 hours each plane. See note.

Voltage:

250 volts AC

Note: Shall meet visual requirements, show no physical damage and shall meet requirements of additional tests as specified in Test Sequence in Figure 3 of TE product

document 108-1329.

1.3 mm (AMPSEAL) CONTACTS

Durability:

TE Spec 109-27. Mate and unmate specimens for 10 cycles at maximum rate of 600 cycles per hour. See note.

Current Rating:

Up to 17 amps gold, up to 8 amps tin, consult TE product document 108-1329.

Contact Retention:

TE Spec 109-30. Apply an axial load of 115 N to contacts in the axial direction with wedge lock in locked position. Contacts shall not

dislodge.

Crimp Tensile Strength:

Contact Size

Tensile Strength

Size 20

80 lbs

Size 18

90 lbs

Size 16

150 lbs

Note: Shall meet visual requirements, show no physical damage and shall meet requirements of additional tests as specified in Test Sequence in Figure 3 of TE product

document 108-1329.

PUNCH-ROD 数据表(PDF) 3 Page - TE Connectivity Ltd

PUNCH-ROD 数据表(HTML) 3 Page - TE Connectivity Ltd

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载