WILCS02IC datasheet(59/71 Pages) MICROCHIP

59 / 71 page

WILCS02IC and WILCS02 Family

Appendix A: Regulatory Approval

Data Sheet

DS70005557C - 59

Appendix A: Regulatory Approval

The WILCS02PE module has received regulatory approval for the following countries:

• United States/FCC ID: 2ADHKWIXCS02

• Canada/ISED:

– IC: 20266-WIXCS02

– HVIN: WILCS02PE

– PMN:Wireless MCU Module with IEEE®802.11 b/g/n

• Europe/CE

• Great Britain/UKCA

• Japan/MIC: 020-240380

• Korea/KCC: R-R-mcp-WIXCS02

• Taiwan/NCC: CCAN24Y11104T0

The WILCS02UE module has received regulatory approval for the following countries:

• United States/FCC ID: 2ADHKWIXCS02U

• Canada/ISED:

– IC: 20266-WIXCS02U

– HVIN: WILCS02UE

– PMN:Wireless MCU Module with IEEE®802.11 b/g/n

• Europe/CE

• Great Britain/UKCA

• Japan/MIC: 020-240380

• Korea/KCC: R-R-mcp-WIXCS02

• Taiwan/NCC: CCAN24Y11114T3

5.1

United States

The WILCS02PE/WILCS02UE modules have received Federal Communications Commission (FCC)

CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” single-modular approval in

accordance with Part 15.212 Modular Transmitter approval. Single-modular transmitter approval

is defined as a complete RF transmission sub-assembly, designed to be incorporated into another

device, that must demonstrate compliance with FCC rules and policies independent of any host. A

transmitter with a modular grant can be installed in different end-use products (referred to as a

host, host product or host device) by the grantee or other equipment manufacturer, then the host

product may not require additional testing or equipment authorization for the transmitter function

provided by that specific module or limited module device.

The user must comply with all of the instructions provided by the Grantee, which indicate

installation and/or operating conditions necessary for compliance.

A host product itself is required to comply with all other applicable FCC equipment authorization

regulations, requirements, and equipment functions that are not associated with the transmitter

module portion. For example, compliance must be demonstrated: to regulations for other

transmitter components within a host product; to requirements for unintentional radiators (Part

15 Subpart B), such as digital devices, computer peripherals, radio receivers, etc.; and to additional

authorization requirements for the non-transmitter functions on the transmitter module (i.e.,

Suppliers Declaration of Conformity (SDoC) or certification) as appropriate (e.g., Bluetooth and Wi-Fi

transmitter modules may also contain digital logic functions).

WILCS02IC 数据表(PDF) 59 Page - Microchip Technology

WILCS02IC 数据表(HTML) 59 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71

数据表下载