8-48

Catalog 1654025

Dimensions are in millimeters

Dimensions are shown for

USA: 1-800-522-6752

South America: 55-11-3611-1514

Revised 12-04

and inches unless otherwise

reference purposes only.

Canada: 1-905-470-4425

Japan: 81-44-900-5102

specified. Values in brackets

Specifications subject

Mexico: 01-800-733-8926

Singapore: 65-4866-151

www.tycoelectronics.com

are U.S. equivalents.

to change.

C. America: 52-55-5-729-0425

UK: 44-1793-528171

Material

Insulation

SO, M83519

Radiation-crosslinked, heat-shrinkable polyvinylidene fluoride

CWT

Radiation-crosslinked, heat-shrinkable polyolefin

Solder and flux

SO63, M83519, S03

Solder: Sn63 Pb37

Flux: ROL1 per ANSI - J - 004 (RMA Flux)

SO96, SO175 series

Solder: Sn96 Ag4

Flux: ROM1 per ANSI - J - 004 (RA Flux)

CWT

Solder: Sn50 Pb32 Cd18

Flux: ROM1 per ANSI - J - 004 (RA Flux)

Ground lead

CWT series

XL polyethylene

SO, M83519, SO175

MIL-W-22759/32 or /41

Typical Performance

Voltage drop

2.5 mV

Tensile strength

Exceeds strength of ground lead

Dielectric strength

1.0 kV immersed

Temperature rating

CWT

-55°C to 125°C [-67°F to 257°F]

SO63/M83519/S03

-55°C to 150°C [-67°F to 302°F]

SO96/SO175 series

-55°C to 175°C [-67°F to 347°F]

Insulation resistance

1000 megohms

Series

Agency

Raychem

CWT

—

D-5023

SO63*

NAS 1747

RT-1404

M83519**

MIL-S-83519/1&/2

RT-1404

SO96***

NAS 1747

RT-1404

SO175

RT-1404

* Meets performance requirements of SAE-AS83519 (formerly MIL-S-83519) and NAS 1747,

supplied with BiAlloy temperature indicator.

** Qualified to SAE-AS83519 (formerly MIL-S-83519), supplied with thermochromic temperature indicator.

***Meets performance requirements of SAE-AS83519 (formerly MIL-S-83519) and NAS 1747, supplied with

thermochromic temperature indicator.

Shield Termination

SolderSleeve Shield Terminators (Continued)

For proper installation of

these devices, the correct

heating tool and reflector

attachment must be used.

Any one of the following

Raychem heating tools is

recommended:

I HL1802E

I AA-400 Super Heater

I CV-1981

I MiniRay

I IR-1759

Product Characteristics

Specifications/Approvals

Installation

For detailed instructions and recommended reflector

attachments, refer to the appropriate Raychem

installation procedure:

Series

Procedure

CWT

RPIP 655-00-D

SO63

RCPS 100-70

M83519 (S01/S02)

RCPS 100-70

SO96

RCPS 100-70

S03

RCPS 100-70

SO175

RCPS-100-70

You will find ordering information for these tools

in section 10.