4 / 13 page
Phoenix Passive Components
PR01
PHOENIX DO BRASIL LTDA
Revision on 2003/12/21
All rights are reserved . Reproduction whole or in
Page 4 of 13
part is prohibited without the written consent of the copyright owner.
ELECTRICAL CHARACTERISTICS
DERATING
The power that the resistor can dissipate depends on the operating temperature.
Fig. 2. Maximum dissipation (Pmax) in percentage of rated power as a function of ambient temperature (Tamb)
APPLICATION INFORMATION
Hot spot
Solder spot
Fig. 3.
φ 0.58 mm Cu – leads
Hot spot temperature rise (
∆T) as a function
of dissipated power
Fig. 4.
φ 0.58 mm Cu - leads
Minimum distance from resistor body to PCB =1mm
Temperature rise (
∆T) at the lead end (solder spot)
as a function of dissipated power at various leads
lengths after mounting
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
