8 / 13 page
Phoenix Passive Components
PR01
PHOENIX DO BRASIL LTDA
Revision on 2003/12/21
All rights are reserved . Reproduction whole or in
Page 8 of 13
part is prohibited without the written consent of the copyright owner.
MARKING
The nominal resistance and tolerance are marked on the resistor using four or five colored bands in
accordance with IEC publication 60062 “color code for fixed resistors”. Standard values of nominal
resistance are taken from the E24/E96 series for resistors with a tolerance of ±5% or
±1%. The values of the
E24/E96 series are in accordance with IEC publication 60063.
ORDERING INFORMATION
Table 2. Ordering code.
LEAD
∅
TOL
TAPING
QTY
pcs
PACKAGING
ORDERING
CODE
REEL
2306 191 5xxxx
5000
AMMOPACK
2322 196 1xxxx
±1%
AMMOPACK
2306 191 2xxx
1000
AMMOPACK
2306 197 53xxx
AMMOPACK
2322 193 14xxx
0.58 Cu
(0.023)
±5%
52.0
(2.05)
5000
REEL
2306 197 23xxx
Dimensions unless specified in mm (inches)
The resistors have a 12 digit ordering code starting with 2306 or 2322.
The next 5 digits indicate the resistor type and packaging see table 2.
For 5% tolerance the last 3 digits indicate the resistance value:
- The first 2 digits indicate the resistance value;
- The last digit indicates the resistance decade in accordance with table 3.
For 1% tolerance the last 4 digits indicate the resistance value:
- The first 3 digits indicate the resistance value;
- The last digit indicates the resistance decade in accordance with table 3.
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
