2

Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings (AMR)

Symbol

Parameter

Value

Unit

VCC

Supply voltage (1)

18

V

Vid

Differential input voltage (2)

±VCC

Vin

Input voltage (3)

(VCC-) - 0.2 to (VCC+) +

0.2

Iin

Input current (4)

10

mA

Tstg

Storage temperature

-65 to 150

°C

Tj

Maximum junction temperature

150

Rthja

Thermal resistance junction-to-

ambient (5)(6)

SOT23-5

250

°C/W

ESD

HBM: human body model (7)

4

kV

MM: machine model (8)

200

V

CDM: charged device model (9)

1.5

kV

Latch-up immunity

200

mA

1. All voltage values, except the differential voltage are with respect to the network ground terminal.

2. The differential voltage is the non-inverting input terminal with respect to the inverting input terminal.

3. Vcc - Vin must not exceed 18 V, Vin must not exceed 18 V

4. Input current must be limited by a resistor in series with the inputs.

5. Rth are typical values.

6. Short-circuits can cause excessive heating and destructive dissipation.

7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin

combinations with other pins floating.

8. Machine model: a 200 pF cap is charged to the specified voltage, then discharged directly between two pins of the device

with no external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.

9. Charged device model: all pins plus package are charged together to the specified voltage and then discharged directly to

ground.

Table 2. Operating conditions

Symbol

Parameter

Value

Unit

VCC

Supply voltage

3 to 16

V

Vicm

Common-mode input voltage range

(VCC-) - 0.1 to (VCC+) + 0.1

Toper

Operating free-air temperature range

-40 to 125

°C

LMC7101

Absolute maximum ratings and operating conditions

DS13567 - Rev 1

page 3/19