| 数据搜索系统,热门电子元器件搜索 |
|
M34116 数据表(PDF) 13 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
M34116 数据表(HTML) 13 Page - STMicroelectronics |
|
13 / 23 page ![]() M116 INSTRUCTION SET INSTRUCTION 1: CHANNEL CONNECTION IN CONFERENCE MODE Three byte are needed: 1)The first byte contains the conference number (bits D0–D3) and the Start bit S (bit D4). When S = 1, all registers of the conference will be cleared. S = 1 is only required in the instruction 1 set of the first channel connected to a new conference. 2)The second byte contains in the bits (D0–D4) the number of the channel to be connected and the In- sert Tone Enable bit IT (D5). When bit IT = 1 all the channels belonging to that conference are en- abled using insert tone function if it’s active (TD = 1). 3) The third byte contains information about the attenuationlevel to be applied to that channel and the opcode (0111). Instruction 1 Format Control Signal Data Bus CS RD C/D WR D7 D6 D5 D4 D3 D2 D1 D0 0 1 0 0 X X X S P3 P2 P1 P0 0 1 0 0 X X IT C4 C3 C2 C1 C0 01 10 A1 A0 X X 0 111 S: Conference Start bit P3–P0: Conference number (1–10) IT: Insertion Tone function enable (IT = 1) C4–C0: Channel number (0–31) A1–A0: Channel attenuation 00 = – 0dB 01 = – 3dB 10 = – 6dB INSTRUCTION 2: CHANNEL CONNECTION IN TRANSPARENT MODE Two bytes are needed: 1) The first byte contains the number of the channel. 2) The second byte contains information about the attenuation level to be applied to that channel and the opcode (0011). PCM data of this channel is not added to any conference and it is transferred to the PCM output. It is not affected by the tone control pins. Instruction 2 Format Control Signal Data Bus CS RD C/D WR D7 D6 D5 D4 D3 D2 D1 D0 0 1 0 0 X X X C4C3 C2C1C0 01 10 A1 A0 X X 0 011 INSTRUCTION 3: CHANNEL DISCONNECTION Two bytes are needed: 1) The first word contains the number of the channel to be disconnected. 2) The second word contains the opcode (1111). One time frame must exist between disconnection and connection of the same channel. Instruction 3 Format Control Signal Data Bus CS RD C/D WR D7 D6 D5 D4 D3 D2 D1 D0 0 1 0 0 X X X C4C3 C2C1C0 01 10 X X X X 1 111 M34116 13/23 |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |