Reliability tests

Issue 5 C1A

Date 23/3/6

ACT1100 / ACT1700 Standard Clock Oscillators

105±3°C 16 hrs measurements after at least 1 hr at atmospheric conditions

Aging

85±3°C 30 days measurements after at least 1 hr at atmospheric conditions.

As per profile fig.1 below and/or soldering iron applied for 5s max tip

temperature 350±10°C

Low Temperature

Storage

-55±3°C 2hrs measurements after at least 1 hr at atmospheric conditions

High Temperature

Storage

Specification as

per page 1 must be

met.

Damp Heat

Constant

Temperature 40±2°C RH 90~95% for 56 days. Measurements after at 1 hr at

atmospheric conditions

Resistance to

Soldering Heat

http://www.actcrystals.com

Fax :

0044 (0)118 979 1283

Test

Test Method

Drop

750mm height.

3 drops.

Onto wood.

Shock

In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice

ISO9001:2000 Registered

For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

Thermal Cycling

100cycles to the temperature profile fig 2 below. Measurements after at least 1

hr at atmospheric conditions

Solderability

255±5°C for 10±0.5s using Rosin resin methyl alcohol flux Solvent (1:4) dipped

to a nominal depth of 0.5mm.

Vibration

10 to 55Hz and return to 10Hzamplitude 1.5mm sweep time 1min.

2 hrs each of X, Y and Z axis.

Total test time 6 hrs

Leak

Helium bomb: Pressure 200kpa Time 70 min

pressure release 5 min measure within 30min

Measurement

Requirements

<4x10

Tel :

0044 (0)118 979 1238

Peak acceleration 981m/s2 Pulse duration 6ms

Each of X, Y and Z axis.

3 shocks each axis

email :

info@actcrystals.com

2 of 3