Parameter

Symbol

500KHz ~ 125.0MHz

Frequency Stability

Δf/fo

±25ppm, ±50ppm and ±100ppm

Temp Operating Range

Topr

0 ~ +70°, -10 ~ +70°C

Temp Storage Range

Tstg

-40~85°C

Supply Voltage

VDD

3.3Vdc ±10%

5.0Vdc ±10%

15mA max

25mA max

25mA max

35mA max

40/60%, 45/55% TTL

40/60%, 45/55% HCMOS

Output Level ‘0’

VOL

TTL 0.4V max, HCMOS .33V max

TTL 0.4V max, HCMOS 0.5V max

Output Level ‘1’

VOH

TTL 2.4V min, HCMOS 2.97V min VDD

TTL 2.4V min, HCMOS 4.5V min VDD

Output Logic

TTL / HCMOS

TTL 10 Gates

CMOS 15 pF

Measured between 0.4V ~ 2.4V (RL = 390

Ω ; CL = 15pF)

Measured between 10%~ 90% VDD (CL = 15pF)

Start-up Time

4mSec max,

Option on Pin 1

Tri State or No Connection

Aging

±5ppm / year max

ACT1100 ( 'V' SERIES )

ACT1700 ( 'CL' SERIES )

Issue 5 C1A

Date 23/3/6

Please Specify

Frequency Range

fo

Please Specify

VDD = 3.3V

VDD = 5.0V

VDD = 3.3V

VDD = 5.0V

Please note that all parameters can not necessarily be specified in the same device

Supply Current

Iop

Please Specify

Please Specify

0.5 - 27MHz

Fax :

0044 (0)118 979 1283

Customer to specify : Frequency, Operating Temperature Range, Frequency Stability, Supply Voltage, Duty Cycle, Output Enable (Tristate) If required

In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice

ISO9001:2000 Registered

http://www.actcrystals.com

For quotations or further information please contact us at:

3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK

Tel :

0044 (0)118 979 1238

email :

info@actcrystals.com

Condition

ACT1100 / ACT1700 Standard Clock Oscillators

The ACT1100 is a full size through hole oscillator. The ACT1700 is a half size through hole oscillator. The

popularity of these families still remains even after the advent of smaller surface mount devices. With wide

frequency and operating temperature ranges, these series offer low cost & good reliability for ATM, Networking,

Microprocessor and Consumer applications. An option with a supply voltage of 2.5V is available please contact

our sales desk for details. For frequencies < 500KHz, >125MHz & ± 10ppm stability please refer to the

ACT1100HS/1700HS data.

Specification

Specification

CMOS 10nSec max, 3nSec typical

@25°C

Duty Cycle

TW/t

Rise & Fall Time

tr/tf

Output Load

TTL

10nSec max, 3nSec typical

Please Specify

Measured at 50% VDD

Measured at +1.4Volts

27 - 125MHz

Plating Material on leads

SnAgCu

Soldering conditions

please refer to page 3

1 of 3