7

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity supply

is the same as that indicated on the rating plate. Connecting it to any other power

source may cause damage.

If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the

fuse cover becomes lost or damaged, the plug must not be used until a suitable

replacement is obtained.

If the plug has to be changed due to damage, a replacement should be fitted,

following the wiring instructions shown below. The old plug must be disposed of as

insertion into a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with

the markings on the terminals of your plug, proceed as follows.

• The wire coloured Blue

must be connected to

the terminal marked N

or coloured Black.

• The wire coloured

Brown must be

connected to the

terminal marked L or

coloured Red.

We strongly recommend that

this machine is connected to

the mains supply via a Residual

Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

This symbol indicates that this is a Class II product, and does not

require an earth connection.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS

THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE

MAINS SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT

ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING

CODE:

BLUE = NEUTRAL

BROWN = LIVE

Plug must be BS1363/A approved.

Always fit

Ensure that the outer sheath of

Neutral

(Blue)

Live

(Brown)

a 13 Amp

the cable is firmly held by the clamp

fuse