2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 5-Function Rotary Hammer Drill.

Before attempting to use this product, please read this manual thoroughly and follow

the instructions carefully. In doing so you will ensure the safety of yourself and that of

others around you, and you can look forward to your purchase giving you long and

satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from

the date of purchase. Please keep your receipt which will be required as proof of

purchase.

This guarantee is invalid if the product is found to have been abused or tampered

with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be

returned to us without prior permission.

This guarantee does not affect your statutory rights.

INVENTORY

Unpack your drill and make sure that the following items are present. Should there be

any damage caused during transit contact your Clarke dealer immediately.

Rotary Hammer

Side Handle Assembly (fitted)

SDS+ Chuck

Keyless Drill Chuck (non hammer mode

only)

Depth Stop Rod

1 x Dust Shield Cap

1 x 250 mm Bull Point Chisel

1 x 250 mm x 20 mm Flat Chisel

1 x 150 mm x 8 mm Drill Bit*

1 x 150 mm x 10 mm Drill Bit*

1 x 150 mm x 12 mm Drill Bit*