9

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

NOTE: Sanding accessories can only be fitted one way. The sanding

accessory must slide on easily. Do not attempt to force it onto the tool

holder. Check the correct direction of the sanding accessory.

5. Fit the sanding sleeve carrier as

described above.

6. Press the spindle lock button and

turn the sander by hand until the

spindle lock engages.

7. Turn the sanding sleeve anti-

clockwise along with the slots on

the sanding sleeve carrier.

DUST EXTRACTION

Use a dust extraction device or a vacuum cleaner to remove dust from the

sanding accessory.

FITTING THE DUST EXTRACTION ADAPTER

1. Slide the dust extraction adapter into the spark deflector.

2. Connect the suction hose (not

included) to the dust extraction

adapter. Use the reducer ring

supplied with the hose if

necessary.

3. Use a suitable dust extraction

device when toxic, carcinogenic

or fine dust is produced. Any

Clarke dust extractor would be

suitable.

CAUTION: HARMFUL OR TOXIC DUST MAY BE PRODUCED WHEN

SANDING LEAD PAINTED SURFACES, WOODS OR METAL. CONTACT

WITH, OR INHALATION OF THESE DUSTS CAN ENDANGER THE HEALTH OF

THE OPERATOR OR BYSTANDERS. CERTAIN DUSTS LIKE OAK AND BEECH

ARE CONSIDERED TO BE CANCEROUS IN CONJUNCTION WITH

ADDITIVES IN WOOD TREATMENTS (CHROMATE, WOOD PRESERVATIVES).

ASBESTOS-CONTAINING MATERIALS MAY ONLY BE HANDLED BY EXPERTS.

CAUTION: - USE A DUST EXTRACTION DEVICE OR A VACUUM CLEANER.

CAUTION: - WORK IN A WELL VENTILATED ROOM. - THE USE OF A DUST

MASK FILTER CLASS P2 IS RECOMMENDED. - OBSERVE LOCAL

REGULATIONS REGARDING THE HANDLING OF CERTAIN MATERIALS.