21

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

COLD START IN WINTER

If the engine is difficult to start in winter, see the engine manual for instructions on how

to cold start.

Different oil grades may be required to help start in colder weather. See page 15 for

more information.

USING THE POWER WASHER

1. Pull the trigger on the gun to start water flow.

• Stand on a stable surface and grip the gun/spray wand firmly with both

hands.

• Expect the gun to kick when the trigger is pulled.

2. Release the trigger to stop water flow.

NOTE: The power washer will automatically go into bypass mode when the

trigger is not being pressed. See Safety Features section on page 14-15

for more information.

ADJUSTING THE SPRAY

The nozzle is adjustable to allow you to change the spray from a narrow jet of water to

a wide spray.

To adjust the nozzle, proceed as follows.

1. Hold the shaft of the spray wand in one hand.

2. Twist the nozzle with the other hand.

3. To vary the spray between narrow and wide, turn the nozzle counter-clockwise

through a half-of-a-turn.

WARNING: DO NOT ALLOW THE UNIT TO OPERATE IN BYPASS MODE

FOR MORE THAN TWO MINUTES AT ANY TIME.