CMV2000 datasheet(19/87 Pages) AMSOSRAM

19 / 87 page

CMV2000

Specification overview

Datasheet

• PUBLIC • Document Feedback

DS000734

• v8-00 • 2025-Jul-07

19 / 87

When a color version of the CMV2000 is used, the color filters are applied in a Bayer pattern.

The color version of the CMV2000 always has microlenses. The typical spectral response of

the CMV with color filters and D263 cover glass is shown in Figure 10. The use of an IR cut-off

filter in the optical path of the CMV2000 image sensor is necessary to obtain good color

separation when using light with an NIR component. The typical spectral response of a

monochrome CMV2000 with microlenses can be found in Figure 10 as well.

Figure 10: Typical spectral response of CMV2000 with RGB color filters and D263 cover glass

A variation from the standard CMV2000 image sensors is processed on 12 µm epi (E12) Si

wafers. The thicker epi-layer wafer starting material increases significantly the QE for

wavelengths above 600 nm. Around 900 nm the QE is about doubled and increases from 8%

to 16%. This is shown in Figure 11.

400

500

600

700

800

900

1000

Wavelength [nm]

Blue_v2

Green1_v2

Green2_v2

Red_v2

Mono E5

CMV2000 数据表(PDF) 19 Page - ams-OSRAM AG