ABSOLUTE MAXIMUM RATINGS

THERMAL CHARACTERISTICS

(1)

ADS5463

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

PACKAGE/ORDERING INFORMATION

SPECIFIED

PACKAGE

PACKAGE

ORDERING

TRANSPORT

PRODUCT

PACKAGE-LEAD

TEMPERATURE

MARKING

NUMBER

MEDIA, QUANTITY

RANGE

ADS5463IPFP

Tray, 96

ADS5463

PFP

–40

°C to 85°C

ADS5463I

PowerPAD

ADS5463IPFPR

Tape and reel, 1000

(1)

For the most current product and ordering information, see the Package Option Addendum located at the end of this data sheet.

(2)

Thermal pad size: 6.15 mm

× 6.15 mm (min), 7.5 mm × 7.5 mm (maximum), see Thermal Pad Addendum located at the end of the data

sheet.

over operating free-air temperature range (unless otherwise noted)

(1)

ADS5463

UNIT

AVDD5 to GND

6

V

Supply voltage

AVDD3 to GND

5

V

DVDD3 to GND

5

V

Analog input to

Valid when supplies are on and within normal ranges. See additional

–0.3 to (AVDD5 + 0.3)

V

GND

information in the Power Supplies portion of the applications information

in the back of the datasheet regarding Clock and Analog Inputs when the

Clock input to GND

–0.3 to (AVDD5 + 0.3)

V

supplies are off.

CLK to CLK

±2.5

V

Digital data output

–0.3 to (DVDD3 + 0.3)

V

to GND

Operating temperature range

–40 to 85

°C

Maximum junction temperature

150

°C

Storage temperature range

–65 to 150

°C

ESD, human-body model (HBM)

2

kV

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied. Kirkendall voidings and current density information for calculation of expected lifetime is available upon

request.

PARAMETER

TEST CONDITIONS

TYP

UNIT

Soldered thermal pad, no airflow

23.7

Soldered thermal pad, 150-LFM airflow

17.8

°C/W

Soldered thermal pad, 250-LFM airflow

16.4

Bottom of package (thermal pad)

2.99

°C/W

(1)

Using 36 thermal vias (6

× 6 array). See PowerPAD Package in the Application Information section.

(2)

(3)

2

Submit Documentation Feedback

Copyright © 2006–2008, Texas Instruments Incorporated

Product Folder Link(s) :ADS5463