 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
STMPE1601 数据表(PDF) 22 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STMPE1601 数据表(HTML) 22 Page - STMicroelectronics |
|
|
22 / 61 page  Clocking system STMPE1601 22/61 8 Clocking system Figure 5. Clocking system The decision on clocks is based on the bits written into the SYS_CTRL registers. Bits 0 to 4 of the SYS_CTRL register allow to control the gating of clocks to the Rotator, Keypad controller, PWM and GPIO respectively in the operational mode. 8.1 Clock source By default, when the STMPE1601 powers up, it derives a 32 KHz clock from the internal RC oscillator for its operation. If an external clock source is available, it must be configured to accept an external clock through the SYS_CTRL register. Reset control: There are 4 sources of reset: ● Reset_N pin ● LVD reset ● Soft reset bit of the SYS_CTRL register ● I2C reset from the I2C block. Internal RC OSC Clock control System control register SCLK Pin CLK_IN System clock |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
