Optics assembly

VT5365

20/26

5.2

Mouse assembly guidelines

1.

Attach the sensor and all other electrical components onto the PCB, with the exception

of the navigation LED.

2.

Form the LED leads and insert the LED into the optical assembly.

3.

Fit the optics with aperture to the PCB using the guideposts, and feed the navigation

LED leads through their openings. Take care to avoid contamination of the sensor

surface. The aperture should self-align to the sensor package.

4.

Assemble the completed PCB onto the base plate.

5.

Solder the navigation LED leads and trim.

6.

Add the mouse top case, feet etc.

Note:

For more details on the optics (including manufacturers) please refer to the STV-365-R0X

user manuals.