Full feature list

STi7101

4/9

1.5

Audio subsystem

●

Digital audio decoder

–

Support for all the most popular audio standards including WMA-9, WMA-9 Pro,

MPEG-1 layer I/II, MPEG-2 layer II, MPEG-2 AAC, MPEG-4 AAC LC

2-channel/5.1 channel, MPEG-4 AAC+SBR 2-channel/5.1 channel, Dolby® Digital

EX, Pro Logic® II, MLP™ and DTS®

–

PCM mixing with internal or external source, and sample rate conversion

–

6- to 2-channel downmixing

–

PCM audio input

–

Independent, multichannel, PCM output, S/PDIF output and analog output

●

Stereo 24-bit audio DAC for analog output

●

IEC958/IEC1937 digital audio output interface (S/PDIF)

●

CSS/CPxM copy protection hardware

1.6

Interfaces

●

External memory interface (EMI)

–

16-bit interface supporting ROM, Flash, SFlash, SRAM, peripherals

–

Access in five banks

–

High speed synchronous mode for interconnecting two STi7101 devices

●

External microprocessor interface (EMPI)

–

32-bit MPX satellite, target-only interface

–

Synchronous operation at MPX clock speed, capable of 100 MHz

●

Dual local memory interface (LMI)

–

Dual interface (2 x 32-bit) for DDR1 200-MHz (DDR400) memories,

supports 128-, 256-, 512-Mbit, and 1-Gbit devices

●

USB 2.0 host controller/PHY interface

●

Serial ATA hard-disk drive support

–

Record and playback with trick modes

–

Pause and time shifting, watch and record

●

100BT Ethernet controller, MAC and MII/RMII

●

On-chip peripherals

–

Four ASCs (UARTs) with Tx and Rx FIFOS, two of which can be used in

smartcard interfaces

–

Two smartcard interfaces and clock generators (improved to reduce external

circuitry)

–

Three SSCs for I²C/SPI master slaves interfaces

–

Serial communications interface (SCIF)

–

Two PWM outputs

–

Teletext serializer and DMA module

–

Six banks of general purpose I/O, 3.3 V tolerant

–

SiLabs line-side (DAA) interface

–

Modem analog front end (MAFE) interface