Optics assembly

VT5366

24/30

7.1

Mouse assembly guidelines

1.

Attach the sensor and all other electrical components onto the PCB with the exception

of the navigation LED.

2.

Form the LED leads and insert the LED into the optical assembly.

3.

Fit the optics/aperture to the PCB using the guideposts. Take care to keep

contamination off the sensor surface. The sensor aperture should self-align to the

VT5366V032 package.

4.

Feed the navigation LED leads through their openings and solder the navigation LED

leads and trim.

5.

Fit the base plate.

6.

Fit mouse top case and feet.

Note:

For more details on the Optics (including Manufacturer details) please refer to the

STV-366-R0X User Manuals