| 数据搜索系统,热门电子元器件搜索 |
|
HD6432351 数据表(PDF) 119 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
HD6432351 数据表(HTML) 119 Page - Renesas Technology Corp |
|
119 / 1025 page ![]() Section 4 Exception Handling Rev. 3.00 Sep 15, 2006 page 85 of 988 REJ09B0330-0300 4.3 Traces Traces are enabled in interrupt control mode 2. Trace mode is not activated in interrupt control mode 0, irrespective of the state of the T bit. For details of interrupt control modes, see section 5, Interrupt Controller. If the T bit in EXR is set to 1, trace mode is activated. In trace mode, a trace exception occurs on completion of each instruction. Trace mode is canceled by clearing the T bit in EXR to 0. It is not affected by interrupt masking. Table 4.4 shows the state of CCR and EXR after execution of trace exception handling. Interrupts are accepted even within the trace exception handling routine. The T bit saved on the stack retains its value of 1, and when control is returned from the trace exception handling routine by the RTE instruction, trace mode resumes. Trace exception handling is not carried out after execution of the RTE instruction. Table 4.4 Status of CCR and EXR after Trace Exception Handling CCR EXR Interrupt Control Mode I UI I2 to I0 T 0 Trace exception handling cannot be used. 2 1 — — 0 Legend: 1: Set to 1 0: Cleared to 0 —: Retains value prior to execution. |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |