H8SXSLASH1663 datasheet(601/1158 Pages) RENESAS

601 / 1158 page

Section 10 16-Bit Timer Pulse Unit (TPU)

Rev.1.00 Jun. 07, 2006 Page 549 of 1102

REJ09B0294-0100

10.4.4

Cascaded Operation

In cascaded operation, two 16-bit counters for different channels are used together as a 32-bit

counter.

This function works by counting the channel 1 (channel 4) counter clock at overflow/underflow of

TCNT_2 (TCNT_5) as set in bits TPSC2 to TPSC0 in TCR.

Underflow occurs only when the lower 16-bit TCNT is in phase-counting mode.

Table 10.30 shows the register combinations used in cascaded operation.

Note:

When phase counting mode is set for channel 1 or 4, the counter clock setting is invalid

and the counter operates independently in phase counting mode.

Table 10.30 Cascaded Combinations

Combination

Upper 16 Bits

Lower 16 Bits

Channels 1 and 2

TCNT_1

TCNT_2

Channels 4 and 5

TCNT_4

TCNT_5

(1) Example of Cascaded Operation Setting Procedure

Figure 10.17 shows an example of the setting procedure for cascaded operation.

Cascaded operation

Set cascading

Start count

Set bits TPSC2 to TPSC0 in the channel 1

(channel 4) TCR to B'1111 to select TCNT_2

(TCNT_5) overflow/underflow counting.

Set the CST bit in TSTR for the upper and lower

channels to 1 to start the count operation.

[1]

[2]

[1]

[2]

Figure 10.17 Example of Cascaded Operation Setting Procedure

H8SX/1663 数据表(PDF) 601 Page - Renesas Technology Corp

H8SX/1663 数据表(HTML) 601 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载