H8SXSLASH1663 datasheet(784/1158 Pages) RENESAS

784 / 1158 page

Section 15 Serial Communication Interface (SCI, IrDA, CRC)

Rev.1.00 Jun. 07, 2006 Page 732 of 1102

REJ09B0294-0100

At power-on and transitions to/from software standby mode, use the following procedure to secure

the appropriate clock duty cycle.

• At power-on

To secure the appropriate clock duty cycle simultaneously with power-on, use the following

procedure.

1. Initially, port input is enabled in the high-impedance state. To fix the potential level, use a

pull-up or pull-down resistor.

2. Fix the SCK pin to the specified output using the CKE1 bit in SCR.

3. Set SMR and SCMR to enable smart card interface mode.

Set the CKE0 bit in SCR to 1 to start clock output.

• At mode switching

 At transition from smart card interface mode to software standby mode

1. Set the data register (DR) and data direction register (DDR) corresponding to the SCK

pin to the values for the output fixed state in software standby mode. (SCI_0, 1, 2, and

4 only)

2. Write 0 to the TE and RE bits in SCR to stop transmission/reception. Simultaneously,

set the CKE1 bit to the value for the output fixed state in software standby mode.

3. Write 0 to the CKE0 bit in SCR to stop the clock.

4. Wait for one cycle of the serial clock. In the mean time, the clock output is fixed to the

specified level with the duty cycle retained.

5. Make the transition to software standby mode.

 At transition from smart card interface mode to software standby mode

1. Clear software standby mode.

2. Write 1 to the CKE0 bit in SCR to start clock output. A clock signal with the

appropriate duty cycle is then generated.

[1] [2] [3]

[4] [5]

[7]

Software

standby

Normal operation

[6]

Figure 15.35 Clock Stop and Restart Procedure

H8SX/1663 数据表(PDF) 784 Page - Renesas Technology Corp

H8SX/1663 数据表(HTML) 784 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载