4.0 Gbps Dual Driver

ADATE209

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibilityis assumedbyAnalogDevicesforitsuse,norforanyinfringementsof patentsorother

rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.461.3113

©2008 Analog Devices, Inc. All rights reserved.

FEATURES

>4.0 Gbps (2 V swings)

120 ps rise time/fall time (2 V swings)

<1.0 W for dual driver (<500 mW/channel)

−1 V to +3.5 V range

Fast termination mode (VTx)

Cable loss compensation

APPLICATIONS

Automatic test equipment

Semiconductor test systems

Board test systems

Instrumentation and characterization equipment

High speed memory testing (DDR2/DDR3/DDR4)

HDMI testing

FUNCTIONAL BLOCK DIAGRAM

DA1

DB1

TERM1

DROUT1

VT1

VL1

VH1

CLC1EN

DA2

DB2

TERM2

DROUT2

VT2

VL2

VH2

CLC2EN

Figure 1.

GENERAL DESCRIPTION

The ADATE209 is a dual pin driver designed for testing DDR2,

DDR3, and DDR4. It can also be used for high speed SoC applica-

tions, such as testing PCI Express 1.0 and HDMI™. The device is a

three-level driver capable of high fidelity swings from 200 mV

to 4 V over a −1 V to +3.5 V range. It has rise/fall times (20% to

80%) under 120 ps for a 2 V programmed swing and 150 ps for

a 3 V programmed swing, and is capable of supporting data

rates of 4.4 Gbps and 3.2 Gbps, respectively.

The device is capable of high speed transitions into and out of

termination mode. It also contains peaking/pre-emphasis circuitry.

The ADATE209 is available in an 8 mm × 8 mm, 49-ball

CSP_BGA.