| 数据搜索系统,热门电子元器件搜索 |
|
SSL152X 数据表(PDF) 8 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SSL152X 数据表(HTML) 8 Page - NXP Semiconductors |
|
8 / 17 page ![]() SSL152x_1 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 01 — 15 September 2008 8 of 17 NXP Semiconductors SSL152x SMPS ICs for low power systems 8.9 OverTemperature Protection (OTP) An accurate temperature protection is provided in the device. When the junction temperature exceeds the thermal shutdown temperature, the IC stops switching. During thermal protection, the IC current is lowered to the start-up current. The IC continues normal operation as soon as the overtemperature situation has disappeared. 8.10 OverVoltage Protection (OVP) Overvoltage protection can be achieved in the application by pulling pin REG above its normal operation level. The current primary stroke is terminated immediately. No new primary stroke is started until the voltage on pin REG drops to its normal operation level. Pin REG has an internal clamp. The current feed into this pin must be limited. 8.11 Characteristics of complete LED power supply 8.11.1 Input The input voltage range comprises the universal AC mains from 80 V to 276 V. 8.11.2 Accuracy The accuracy of the complete converter, functioning as a voltage source with primary sensing, is approximately 8 % (mainly dependent on the transformer coupling). The accuracy with secondary sensing is defined by the accuracy of the external components. For safety requirements in case of opto coupler feedback loss, the primary sensing remains active when an overvoltage circuit is connected. 8.11.3 Efficiency An efficiency over 80 % at maximum output power can be achieved for a complete converter designed for universal mains. 8.11.4 Ripple A minimum ripple is obtained in a system designed for a maximum duty factor of 50 % under normal operating conditions and a minimized dead time. The magnitude of the ripple in the output voltage is determined by the frequency and duty factor of the converter, the output current level, and the value and ESR of the output capacitor. 8.11.5 Output A wide range of output power levels can be handled by choosing the RDSon and package of the SSL152x family. Power levels of up to 15 W can be realized. |
|
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |