MSP430F2003TPWR datasheet(10/88 Pages) TI

10 / 88 page

MSP430x20x1, MSP430x20x2, MSP430x20x3

MIXED SIGNAL MICROCONTROLLER

SLAS491D -- AUGUST 2005 -- REVISED SEPTEMBER 2007

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

Terminal Functions, MSP430x20x3 (Continued)

TERMINAL

NAME

PW, or N

RSA

I/O

DESCRIPTION

NAME

NO.

I/O

DESCRIPTION

XIN/P2.6/TA1

I/O

Input terminal of crystal oscillator

General-purpose digital I/O pin

Timer_A, compare: Out1 output

XOUT/P2.7

I/O

Output terminal of crystal oscillator

General-purpose digital I/O pin

RST/NMI/SBWTDIO

Reset or nonmaskable interrupt input

Spy-Bi-Wire test data input/output during programming and test

TEST/SBWTCK

Selects test mode for JTAG pins on Port1. The device protection fuse is

connected to TEST.

Spy-Bi-Wire test clock input during programming and test

VCC

Supply voltage

VSS

Ground reference

DVCC

Digital supply voltage

AVCC

Analog supply voltage

DVSS

Digital ground reference

AVSS

Analog ground reference

QFN Pad

Package

Pad

QFN package pad connection to VSS recommended.

NOTE: If XOUT/P2.7 is used as an input, excess current will flow until P2SEL.7 is cleared. This is due to the oscillator output driver connection

to this pad after reset.

MSP430F2003TPWR 数据表(PDF) 10 Page - Texas Instruments

MSP430F2003TPWR 数据表(HTML) 10 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88

数据表下载