STBP120

Maximum rating

Doc ID 15492 Rev 4

13/36

5

Maximum rating

Stressing the device above the rating listed in the "absolute maximum ratings" table may

cause permanent damage to the device. These are stress ratings only and operation of the

device at these or any other conditions above those indicated in the operating sections of

this specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability. Refer also to the STMicroelectronics SURE

Program and other relevant quality documents.

Table 2.

Absolute maximum ratings

Symbol

Parameter

Value

Unit

–55 to 150

C

(1)

1.

Reflow at peak temperature of 260 °C. The time above 255 °C must not exceed 30 seconds.

Lead solder temperature for 10 seconds

260

C

(2)

2.

Maximum junction temperature is internally limited by the thermal shutdown circuit (not valid for reverse

current, see Chapter 3.2).

Operating junction temperature range

–40 to 150

C

Operating ambient temperature range

–40 to 85

C

Input voltage (pins IN)

–0.3 to 30

V

Input / output voltage (pins OUT)

–0.3 to 12

V

Input / output voltage (other pins)

–0.3 to 7

V

Input / output current through MOSFET (pins IN, OUT)

2000

mA

Output current (pin FLT)15

mA

3.

System-level value (see Figure 4, C1

≥ 1 µF low ESR ceramic capacitor).

±15 (air),

±8 (contact)

kV

4.

Human body model, 100 pF discharged through a 1.5k

Ω resistor according the JESD22/A114

specification.

2000

V

5.

Machine model, 200 pF discharged through all pins according the JESD22/A115 specification.

200

V