STM1066

DC and AC characteristics

13/20

5

DC and AC characteristics

This section summarizes the operating measurement conditions and the DC and AC

characteristics of the device. The parameters in the DC and AC characteristics tables that

follow are derived from tests performed under the measurement conditions summarized in

Table 4: Operating and AC measurement conditions. Designers should check that the

operating conditions in their circuit match the operating conditions when relying on the

quoted parameters.

Figure 11.

Waveforms

Note:

Table 4.

Operating and AC measurement conditions

Parameter

Condition

Unit

2.7 to 5.5

V

–30 to 85

°C

Input rise and fall times

≤5ns

ai 13919

VCC

(VBAT)

OUT

VTH+

VTH-

VIN (5V

input

option)

EN VIL

EN VIH

INHIBIT

EN (VBUS )

Output

follows

V

~2.3V

~2.1V

in