HAL 710, HAL 730

DATA SHEET

10

Oct. 13, 2009; DSH000031_002EN

Micronas

3.2. Dimensions of Sensitive Area

0.25 mm

× 0.12 mm

3.3. Positions of Sensitive Areas

3.4. Absolute Maximum Ratings

Stresses beyond those listed in the “Absolute Maximum Ratings” may cause permanent damage to the device. This

is a stress rating only. Functional operation of the device at these conditions is not implied. Exposure to absolute

maximum rating conditions for extended periods will affect device reliability.

This device contains circuitry to protect the inputs and outputs against damage due to high static voltages or electric

fields; however, it is advised that normal precautions be taken to avoid application of any voltage higher than abso-

lute maximum-rated voltages to this high-impedance circuit.

All voltages listed are referenced to ground (GND).

3.4.1. Storage and Shelf Life

The permissible storage time (shelf life) of the sensors is unlimited, provided the sensors are stored at a maximum of

30 °C and a maximum of 85% relative humidity. At these conditions, no Dry Pack is required.

Solderability is guaranteed for one year from the date code on the package.

3.5. Recommended Operating Conditions

Functional operation of the device beyond those indicated in the “Recommended Operating Conditions” of this spec-

ification is not implied, may result in unpredictable behavior of the device and may reduce reliability and lifetime.

All voltages listed are referenced to ground (GND).

SOT89B-2

(2.35

1.175 mm

y0.975 mm

Symbol

Parameter

Pin No.

Min.

Max.

Unit

Supply Voltage

1

−15

V

Output Voltage

2, 3

−0.3

V

Continuous Output Current

2, 3

−

mA

Junction Temperature Range

−40

170

°C

Symbol

Parameter

Pin No.

Min.

Typ.

Max.

Unit

Supply Voltage

1

3.8

−

24

V

Continuous Output Current

30

−

10

mA

Output Voltage (output switch off)

30

−

24

V