AM1808AZCED3 datasheet(70/264 Pages) TI

70 / 264 page

AM1808

SPRS653A – FEBRUARY 2010 – REVISED APRIL 2010

www.ti.com

6.2

Recommended Clock and Control Signal Transition Behavior

All clocks and control signals must transition between VIH and VIL (or between VIL and VIH) in a monotonic

manner.

6.3

Power Supplies

6.3.1

Power-on Sequence

The device should be powered-on in the following order:

•

1) RTC (RTC_CVDD) may be powered from an external device (such as a battery) prior to all other

supplies being applied or powered-up at the same time as CVDD. If the RTC is not used, RTC_CVDD

should be connected to CVDD. RTC_CVDD should not be left unpowered while CVDD is powered.

•

2a) All variable 1.2V - 1.0V core logic supplies (CVDD)

•

2b) All static 1.2V logic supplies (RVDD, VDDA_12_PLL0, VDDA_12_PLL1, USB_CVDD ,

SATA_VDD). If voltage scaling is not used on the device, groups 2a) and 2b) can be controlled from

the same power supply and powered up together.

•

3) All static 1.8V IO supplies (DVDD18, DDR_DVDD18, USB0_VDDA18 , USB1_VDDA18 and

SATA_VDDR) and any of the LVCMOS IO supply groups used at 1.8V nominal (DVDD3318_A,

DVDD3318_B, or DVDD3318_C).

•

4) All analog 3.3V PHY supplies (USB0_VDDA33 and USB1_VDDA33; these are not required if both

USB0 and USB1 are not used) and any of the LVCMOS IO supply groups used at 3.3V nominal

(DVDD3318_A, DVDD3318_B, or DVDD3318_C).

There is no specific required voltage ramp rate for any of the supplies as long as the LVCMOS supplies

operated at 3.3V (DVDD3318_A, DVDD3318_B, or DVDD3318_C) never exceed the STATIC 1.8V

supplies by more than 2 volts.

RESET must be maintained active until all power supplies have reached their nominal values.

6.3.2

Power-off Sequence

The power supplies can be powered-off in any order as long as LVCMOS supplies operated at 3.3V

(DVDD3318_A, DVDD3318_B, or DVDD3318_C) never exceed static 1.8V supplies by more than 2 volts.

There is no specific required voltage ramp down rate for any of the supplies (except as required to meet

the above mentioned voltage condition).

Peripheral Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Link(s): AM1808

AM1808AZCED3 数据表(PDF) 70 Page - Texas Instruments

AM1808AZCED3 数据表(HTML) 70 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

数据表下载