| 数据搜索系统,热门电子元器件搜索 |
|
MPC8308CVMADDA 数据表(PDF) 35 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MPC8308CVMADDA 数据表(HTML) 35 Page - Freescale Semiconductor, Inc |
|
35 / 88 page ![]() MPC8308 PowerQUICC II Pro Processor Hardware Specification, Rev. 1 Freescale Semiconductor 35 PCI Express 11.3 Clocking Dependencies The ports on the two ends of a link must transmit data at a rate that is within 600 parts per million (ppm) of each other at all times. This is specified to allow bit rate clock sources with a ±300 ppm tolerance. 11.4 Physical Layer Specifications Following is a summary of the specifications for the physical layer of PCI Express on this device. For further details as well as the specifications of the transport and data link layer, use the PCI Express Base Specification, Rev. 1.0a. 11.4.1 Differential Transmitter (TX) Output Table 34 defines the specifications for the differential output at all transmitters (TXs). The parameters are specified at the component pins. Table 34. Differential Transmitter (TX) Output Specifications Parameter Symbol Comments Min Typical Max Units Notes Unit interval UI Each UPETX is 400 ps ± 300 ppm. UPETX does not account for Spread Spectrum Clock dictated variations. 399.88 400 400.12 ps 1 Differential peak-to-peak output voltage VTX-DIFFp-p VPEDPPTX = 2*|VTX-D+ - VTX-D-| 0.8 — 1.2 V 2 De-emphasized differential output voltage (ratio) VTX-DE-RATIO Ratio of the VPEDPPTX of the second and following bits after a transition divided by the VPEDPPTX of the first bit after a transition. –3.0 –3.5 –4.0 dB 2 Minimum TX eye width TTX-EYE The maximum Transmitter jitter can be derived as TTX-MAX-JITTER = 1 - UPEEWTX= 0.3 UI. 0.70 ——UI 2, 3 Maximum time between the jitter median and maximum deviation from the median TTX-EYE-MEDIAN-t o- MAX-JITTER Jitter is defined as the measurement variation of the crossing points (VPEDPPTX = 0 V) in relation to a recovered TX UI. A recovered TX UI is calculated over 3500 consecutive unit intervals of sample data. Jitter is measured using all edges of the 250 consecutive UI in the center of the 3500 UI used for calculating the TX UI. — — 0.15 UI 2, 3 |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |