Page 8 of 10

All Specifications are subject to change. All data is accurate to the best of our knowledge.

MicroE Systems is not responsible for errors.

Program Mercury Encoder Electronics

• Set interpolation in integer steps from x4 to x256 (Mercury 2000)

or x4 to x1024 (Mercury 3000)

• Set maximum output frequency to match your controller

Install Mercury Encoder System

• Align sensor using Signal Level display and Encoder Signal data plot

• Locate index and see when sensor is over the scale’s index mark

• Verify sensor output over length of scale using the Signal Strength plot

Monitor Mercury Encoder Operation

• Read encoder position in engineering units of your choice

• Read the encoder's hour meter to monitor system usage

• Capture alarms while system operates unattended

Diagnose Mercury Encoder Performance

• Capture signal data and email it to MicroE for rapid diagnostic support

• Monitor alarms, view the alarm history log

System Description

The SmartPrecision Software system includes Software on CD, a

computer interface adapter, computer cable, and a power adapter.

The encoder signal plot, or Lissajous plot, reveals the underlying strength

and uniformity of the sensor’s output.

How to Order SmartPrecision Software

To Purchase the SmartPrecision Software system, use this Model

Number: SSWA120 for 120 VAC, 60Hz US Standard 2-prong plug

or SSWA220 for 220 VAC, 50 Hz European Std. 2-prong plug

SmartPrecision Software

makes Mercury the

industry’s easiest to use

encoder. It helps you

program, set up, use, and

diagnose Mercury 2000

and 3000 encoders with

the click of a mouse.

Compatible with

Windows 95, 98, ME, NT,

2000, and XP.

SmartPrecision Software for

Mercury 2000 and 3000 Encoder Systems