| 数据搜索系统,热门电子元器件搜索 |
|
MSP430F5528IRGC 数据表(PDF) 72 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
MSP430F5528IRGC 数据表(HTML) 72 Page - Texas Instruments |
|
72 / 115 page ![]() MSP430F551x MSP430F552x SLAS590D – OCTOBER 2009 – REVISED APRIL 2010 www.ti.com REF, External Reference over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (1) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT Positive external reference VeREF+ VeREF+ > VREF–/VeREF– (2) 1.4 AVCC V voltage input Negative external reference VREF–/VeREF– VeREF+ > VREF–/VeREF– (3) 0 1.2 V voltage input (VeREF+ – Differential external reference VeREF+ > VREF–/VeREF– (4) 1.4 AVCC V VREF–/VeREF–) voltage input 1.4 V ≤ VeREF+ ≤ VAVCC , VeREF– = 0 V, fADC12CLK = 5 MHz, 2.2 V/3 V ±8.5 ±26 µA ADC12SHTx = 1h, Conversion rate 200ksps IVeREF+, Static input current IVREF–/VeREF– 1.4 V ≤ VeREF+ ≤ VAVCC , VeREF– = 0 V, fADC12CLK = 5 MHz, 2.2 V/3 V ±1 µA ADC12SHTx = 8h, Conversion rate 20ksps CVREF+/- Capacitance at VREF+/- terminal (5)10 µF (1) The external reference is used during ADC conversion to charge and discharge the capacitance array. The input capacitance, Ci, is also the dynamic load for an external reference during conversion. The dynamic impedance of the reference supply should follow the recommendations on analog-source impedance to allow the charge to settle for 12-bit accuracy. (2) The accuracy limits the minimum positive external reference voltage. Lower reference voltage levels may be applied with reduced accuracy requirements. (3) The accuracy limits the maximum negative external reference voltage. Higher reference voltage levels may be applied with reduced accuracy requirements. (4) The accuracy limits minimum external differential reference voltage. Lower differential reference voltage levels may be applied with reduced accuracy requirements. (5) Two decoupling capacitors, 10µF and 100nF, should be connected to VREF to decouple the dynamic current required for an external reference source if it is used for the ADC12_A. See also the MSP430x5xx Family User's Guide (SLAU208). REF, Built-In Reference over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (1) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT REFVSEL = {2} for 2.5 V REFON = REFOUT = 1 3 V 2.50 ±1.5% IVREF+= 0 A REFVSEL = {1} for 2.0 V Positive built-in reference VREF+ REFON = REFOUT = 1 3 V 1.98 ±1.5% V voltage output IVREF+= 0 A REFVSEL = {0} for 1.5 V REFON = REFOUT = 1 2.2 V/ 3 V 1.49 ±1.5% IVREF+= 0 A REFVSEL = {0} for 1.5 V, reduced 1.8 performance AVCC minimum voltage, REFVSEL = {0} for 1.5 V 2.2 AVCC(min) Positive built-in reference V active REFVSEL = {1} for 2.0 V 2.3 REFVSEL = {2} for 2.5 V 2.8 REFON = 1, REFOUT = 0, REFBURST = 0 3 V 100 140 µA Operating supply current into IREF+ AVCC terminal (2) (3) REFON = 1, REFOUT = 1, REFBURST = 0 3 V 0.9 1.5 mA (1) The reference is supplied to the ADC by the REF module and is buffered locally inside the ADC. The ADC uses two internal buffers, one smaller and one larger for driving the VREF+ terminal. When REFOUT = 1, the reference is available at the VREF+ terminal, as well as, used as the reference for the conversion and utilizes the larger buffer. When REFOUT = 0, the reference is only used as the reference for the conversion and utilizes the smaller buffer. (2) The internal reference current is supplied via terminal AVCC. Consumption is independent of the ADC12ON control bit, unless a conversion is active. REFOUT = 0 represents the current contribution of the smaller buffer. REFOUT = 1 represents the current contribution of the larger buffer without external load. (3) The temperature sensor is provided by the REF module. Its current is supplied via terminal AVCC and is equivalent to IREF+ with REFON =1 and REFOUT = 0. 72 Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |