| 数据搜索系统,热门电子元器件搜索 |
|
MSP430F5528IRGC 数据表(PDF) 74 Page - Texas Instruments |
|
|
|||||||||||||||||||||||||||||
MSP430F5528IRGC 数据表(HTML) 74 Page - Texas Instruments |
|
74 / 115 page ![]() MSP430F551x MSP430F552x SLAS590D – OCTOBER 2009 – REVISED APRIL 2010 www.ti.com Comparator B (continued) over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT CBPWRMD = 00, CBON = 1, 0.35 0.6 1.0 µs CBF = 1, CBFDLY = 00 CBPWRMD = 00, CBON = 1, 0.6 1.0 1.8 µs CBF = 1, CBFDLY = 01 Propagation delay with filter tPD,filter active CBPWRMD = 00, CBON = 1, 1.0 1.8 3.4 µs CBF = 1, CBFDLY = 10 CBPWRMD = 00, CBON = 1, 1.8 3.4 6.5 µs CBF = 1, CBFDLY = 11 Comparator enable time, settling CBON = 0 to CBON = 1 tEN_CMP 1 2 µs time CBPWRMD = 00, 01, 10 tEN_REF Resistor reference enable time CBON = 0 to CBON = 1 0.3 1.5 µs VIN*(n VIN = reference into resistor ladder. VCB_REF Reference voltage for a given tap +1) V n = 0 to 31 /32 Ports PU.0 and PU.1 over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT VOH High-level output voltage VUSB = 3.3 V ± 10%, IOH = -25 mA 2.4 V VOL Low-level output voltage VUSB = 3.3 V ± 10%, IOL = 25 mA 0.4 V VIH High-level input voltage VUSB = 3.3 V ± 10% 2.0 V VIL Low-level input voltage VUSB = 3.3 V ± 10% 0.8 V USB-Output Ports DP and DM over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT VOH D+, D- single ended USB 2.0 load conditions 2.8 3.6 V VOL D+, D- single ended USB 2.0 load conditions 0 0.3 V Z(DRV) D+, D- impedance Including external series resistor of 27 Ω 28 44 Ω Full speed, differential, CL = 50 pF, tRISE Rise time 4 20 ns 10%/90%, Rpu on D+ Full speed, differential, CL = 50 pF, tFALL Fall time 4 20 ns 10%/90%, Rpu on D+ USB-Input Ports DP and DM over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) PARAMETER TEST CONDITIONS VCC MIN TYP MAX UNIT V(CM) Differential input common mode range 0.8 2.5 V Z(IN) Input impedance 300 k Ω VCRS Crossover voltage 1.3 2.0 V VIL Static SE input logic low level 0.8 V VIH Static SE input logic high level 2.0 V VDI Differential input voltage 0.2 V 74 Submit Documentation Feedback Copyright © 2009–2010, Texas Instruments Incorporated |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |