DP35DP datasheet(40/84 Pages) INTEL

40 / 84 page

Intel Desktop Board DP35DP Technical Product Specification

2.2

Connectors and Headers

CAUTION

Only the following connectors and headers have overcurrent protection: Back panel

and front panel USB, with support for 1394.

The other internal connectors/headers are not overcurrent protected and should

connect only to devices inside the computer’s chassis, such as fans and internal

peripherals. Do not use these connectors/headers to power devices external to the

computer’s chassis. A fault in the load presented by the external devices could cause

damage to the computer, the power cable, and the external devices themselves.

NOTE

Computer systems that have an unshielded cable attached to a USB port may not

meet FCC Class B requirements, even if no device is attached to the cable. Use

shielded cable that meets the requirements for full-speed devices.

This section describes the board’s connectors and headers. The connectors and

headers can be divided into these groups:

•

Back panel I/O connectors (see page 41)

•

Component-side connectors and headers (see page 42)

DP35DP 数据表(PDF) 40 Page - Intel Corporation