| 数据搜索系统,热门电子元器件搜索 |
|
R5F3650ECNFB 数据表(PDF) 28 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
R5F3650ECNFB 数据表(HTML) 28 Page - Renesas Technology Corp |
|
28 / 112 page ![]() R01DS0015EJ0100 Rev.1.00 Page 28 of 109 Feb 07, 2011 M16C/65C Group 3. Address Space 3.2 Memory Map Special function registers (SFRs) are allocated from address 00000h to 003FFh and from 0D000h to 0D7FFh. Peripheral function control registers are located here. All blank areas within SFRs are reserved. Do not access these areas. Internal RAM is allocated from address 00400h and higher, with 10 KB of internal RAM allocated from 00400h to 02BFFh. Internal RAM is used not only for data storage, but also for the stack area when subroutines are called or when an interrupt request is accepted. The internal ROM is flash memory. Three internal ROM areas are available: data flash, program ROM 1, and program ROM 2. The data flash is allocated from 0E000h to 0FFFFh. This data flash area is mostly used for data storage, but can also store programs. Program ROM 2 is allocated from 10000h to 13FFFh. Program ROM 1 is allocated from FFFFFh and lower, with the 64 KB program ROM 1 area allocated from address F0000h to FFFFFh. The special page vectors are allocated from FFE00h to FFFD7h. They are used for the JMPS and JSRS instructions. Refer to the M16C/60, M16C/20, M16C/Tiny Series Software Manual for details. The fixed vector table for interrupts is allocated from FFFDCh to FFFFFh. The 256 bytes beginning with the start address set in the INTB register compose the relocatable vector table for interrupts. Figure 3.2 shows the Memory Map. Figure 3.2 Memory Map Notes: 1. Do not access reserved areas. 2. The figure above applies under the following conditions: - Memory expansion mode - The PM10 bit in the PM1 register is 1 (addresses 0E000h to 0FFFFh are used as data flash) - The PRG2C0 bit in the PRG2C register is 0 (program ROM 2 enabled) - The PM13 bit in the PM1 register is 1 (all areas in internal RAM, and the program ROM 1 area from 80000h are usable) 3. Do not change the data from FFh. Internal RAM Reserved area (1) 00000h XXXXXh 0D000h SFR 00400h 0D800h Internal ROM (data flash) 0E000h Internal ROM (program ROM 2) 10000h Reserved area (1) Internal ROM (program ROM 1) 14000h 80000h YYYYYh FFFFFh Reserved area (1) 28000h 27000h External area External area Special page vector table FFFFFh FFFDCh FFE00h FFFD8h Reserved area (3) 256 bytes beginning with the start address set in the INTB register Fixed vector table Address for ID code stored OFS1 address Relocatable vector table On-chip debugger monitor area 13FFFh 13FF0h 13000h User boot code area Size Address YYYYYh Program ROM 1 E0000h 256 KB C0000h 384 KB A0000h 512 KB 80000h Size Address XXXXXh Internal RAM 12 KB 033FFh 20 KB 053FFh 31 KB 07FFFh 47 KB 0BFFFh 128 KB SFR External area |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |