SSL4101T

All information provided in this document is subject to legal disclaimers.

© NXP B.V. 2011. All rights reserved.

Product data sheet

Rev. 1 — 21 April 2011

7 of 29

NXP Semiconductors

SSL4101T

GreenChip III+ SMPS control IC

7.1.2 Supply management

All internal reference voltages are derived from a temperature compensated and trimmed

on-chip band gap circuit. Internal reference currents are derived from a temperature

compensated and trimmed on-chip current reference circuit.

7.1.3 Latch input

Pin LATCH is a general purpose input pin, which can be used to switch off both

converters is stopped as soon as the voltage on this pin drops below 1.25 V.

At initial start-up the switching is inhibited until the capacitor on the LATCH pin is charged

above 1.35 V (typical). No internal filtering is done on this pin. An internal Zener clamp of

2.9 V (typical) protects this pin from excessive voltages.

Fig 4.

Start-up sequence, normal operation and restart sequence

LATCH

PROTECTION

PFCSENSE

PFCDRIVER

FBSENSE

FBDRIVER

FBCTRL

VOSENSE

charging VCC

capacitor

starting

converters

normal

operation

protection

restart

soft start

soft start

VINSENSE

014aaa156