UBA2016AP datasheet(1/42 Pages) PHILIPS

部件名	UBA2016AP

功能描述	600 V fluorescent lamp driver with PFC, linear dimming and boost function

PDF	42 Pages

Scroll/Zoom	100%

制造商	PHILIPS [NXP Semiconductors]

网页	http://www.nxp.com

标志

1 / 42 page

1.

General description

The UBA2016A/15/15A are high voltage Integrated Circuits (IC) intended to drive

fluorescent lamps with filaments such as Tube Lamps (TL) and Compact Fluorescent

Lamps (CFL) in general lighting applications. The IC comprises a fluorescent lamp control

module, half-bridge driver, built-in critical conduction mode Power Factor Correction

(PFC) controller/driver and several protection mechanisms. The IC drives fluorescent

lamp(s) using a half-bridge circuit made of two MOSFETs with a supply voltage of up to

600 V.

The UBA2016A/15/15A are designed to be supplied by a start-up bleeder resistor and a

dV/dt supply from the half-bridge circuit, or any other auxiliary supply derived from the

half-bridge or the PFC. The supply current of the IC is low. An internal clamp limits the

supply voltage.

2.

Features and benefits

Power factor correction features:

Integrated 4-pin critical conduction mode PFC controller/driver

Open and short pin-short protection on PFC feedback pin

Overcurrent protection

Overvoltage protection

Half-bridge driver features:

Integrated level-shifter for the high-side driver of the half-bridge

Integrated bootstrap diode for the high-side driver supply of the half-bridge

Independent non-overlap time

Fluorescent lamp controller features:

Linear dimming (UBA2016A and UBA2015A only)

EOL (End-Of-Life) detection (both symmetrical and asymmetrical)

Adjustable preheat time

Adjustable preheat current

Adjustable fixed frequency preheat (UBA2015 and UBA2015A only)

Lamp ignition failure detection

Ignition detection of all lamps fat multiple lamps with separate resonant tanks

Second ignition attempt if first failed

Constant output power independent of mains voltage variations

Automatic restart after changing lamps

Adjustable lamp current boost at start-up (UBA2016A only)

Lamp current control

UBA2016A/15/15A

600 V fluorescent lamp driver with PFC, linear dimming and

boost function

Rev. 1 — 20 May 2011

Objective data sheet

类似零件编号 - UBA2016AP

制造商	部件名	数据表	功能描述
NXP Semiconductors	UBA2016A	381Kb / 42P	600 V fluorescent lamp driver with PFC, linear dimming and boost function Rev. 3-16 November 2011
NXP Semiconductors	UBA2016A_1111	381Kb / 42P	600 V fluorescent lamp driver with PFC, linear dimming and boost function Rev. 3-16 November 2011

More results

类似说明 - UBA2016AP

制造商	部件名	数据表	功能描述
OKI electronic componet...	MSC1209	172Kb / 16P	42-Bit Vacuum Fluorescent Display Tube Driver with Digital Dimming Function
Cirrus Logic	CRD1601-120W	290Kb / 12P	High-efficiency PFC Fluorescent Lamp Driver Reference Design
NXP Semiconductors	UBA2016A_1111	381Kb / 42P	600 V fluorescent lamp driver with PFC, linear dimming and boost function Rev. 3-16 November 2011
Fairchild Semiconductor	FLS0116	1Mb / 13P	MOSFET Integrated Smart LED Lamp Driver IC with PFC Function
	AN-9744	988Kb / 7P	Smart LED Lamp Driver IC with PFC Function
	FL7701MX	3Mb / 13P	Smart LED Lamp Driver IC with PFC Function
Monolithic Power System...	HR2000	992Kb / 20P	Fluorescent Lamp HB Driver with PFC
NXP Semiconductors	AN10958	2Mb / 56P	Fluorescent lamp driver with PFC using the UBA2015/16 family Rev. 2-9 August 2012
NXP Semiconductors	UBA2017	530Kb / 29P	600 V fluorescent lamp driver with linear dimming function Rev. 2-15 May 2012
ON Semiconductor	FL7701	2Mb / 15P	Smart LED Lamp Driver IC with PFC Function June 2013 Rev. 1.0.4