| 数据搜索系统,热门电子元器件搜索 |
|
TMS320VC5507 数据表(PDF) 27 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMS320VC5507 数据表(HTML) 27 Page - Texas Instruments |
|
27 / 108 page ![]() 15 14 13 12 11 10 9 8 DST AMODE SRC AMODE END PROG Reserved REPEAT AUTO INIT R/W, 00 R/W, 00 R/W, 0 R, 0 R/W, 0 R/W, 0 7 6 5 4 0 EN PRIO FS SYNC R/W, 0 R/W, 0 R/W, 0 R/W, 00000 LEGEND: R = Read, W = Write, n = value after reset SM320VC5507-EP www.ti.com SPRS613 – SEPTEMBER 2009 • USB full-speed slave interface supporting: – Bulk – Interrupt – Isochronous • I2C multi-master and slave interface (I2C compatible except, no fail-safe I/O buffers) • Real-time clock with crystal input, separate clock domain and supply pins • 4-channel 10-bit Successive Approximation A/D For detailed information on the C55x DSP peripherals, see the following documents: • TMS320C55x DSP Functional Overview (literature number SPRU312) • TMS320C55x DSP Peripherals Overview Reference Guide (literature number SPRU317) 3.4 Direct Memory Access (DMA) Controller The 5507 DMA provides the following features: • Four standard ports, one for each of the following data resources: DARAM, SARAM, peripherals and external memory • Six channels, which allow the DMA controller to track the context of six independent DMA channels • Programmable low/high priority for each DMA channel • One interrupt for each DMA channel • Event synchronization. DMA transfers in each channel can be dependent on the occurrence of selected events. • Programmable address modification for source and destination addresses • Dedicated idle domain allows the DMA controller to be placed in a low-power (idle) state under software control. • Dedicated DMA channel used by the HPI to access internal memory (DARAM) The 5507 DMA controller allows transfers to be synchronized to selected events. The 5507 supports 15 separate sync events and each channel can be tied to separate sync events independent of the other channels. Sync events are selected by programming the SYNC field in the channel-specific DMA channel control register (DMA_CCR). 3.4.1 DMA Channel Control Register (DMA_CCR) The channel control register (DMA_CCR) bit layouts are shown in Figure 3-3. Figure 3-3. DMA_CCR Bit Locations The SYNC[4:0] bits specify the event that can initiate the DMA transfer for the corresponding DMA channel. The five bits allow several configurations as listed in Table 3-4. The bits are set to zero upon reset. For those synchronization modes with more than one peripheral listed, the Serial Port Mode bit field of the External Bus Selection Register dictates which peripheral event is actually connected to the DMA input. Copyright © 2009, Texas Instruments Incorporated Functional Overview 27 Submit Documentation Feedback Product Folder Link(s): SM320VC5507-EP |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |