| 数据搜索系统,热门电子元器件搜索 |
|
TMS320VC5507 数据表(PDF) 67 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
TMS320VC5507 数据表(HTML) 67 Page - Texas Instruments |
|
67 / 108 page ![]() SM320VC5507-EP www.ti.com SPRS613 – SEPTEMBER 2009 practices should always be observed when planning trace routing to the discrete components used in the oscillator circuit. Specifically, the crystal and the associated discrete components should be located as close to the DSP as physically possible. Also, X1 and X2/CLKIN traces should be separated as soon as possible after routing away from the DSP to minimize parasitic capacitance between them, and a ground trace should be run between these two signal lines. This also helps to minimize stray capacitance between these two signals. 5.6.3 Clock Generation in Bypass Mode (DPLL Disabled) The frequency of the reference clock provided at the X2/CLKIN pin can be divided by a factor of one, two, or four to generate the internal CPU clock cycle. The divide factor (D) is set in the BYPASS_DIV field of the clock mode register. The contents of this field only affect clock generation while the device is in bypass mode. In this mode, the digital phase-locked loop (DPLL) clock synthesis is disabled. Table 5-2 and Table 5-3 assume testing over recommended operating conditions and H = 0.5tc(CO) (see Figure 5-3). Table 5-2. CLKIN Timing Requirements CVDD = 1.2 V CVDD = 1.6 V CVDD = 1.35 V NO. UNIT MIN MAX MIN MAX C1 tc(CI) Cycle time, X2/CLKIN 20 400(1) 20 400(1) ns C2 tf(CI) Fall time, X2/CLKIN 4 4 ns C3 tr(CI) Rise time, X2/CLKIN 4 4 ns C10 tw(CIL) Pulse duration, CLKIN low 6 6 ns C11 tw(CIH) Pulse duration, CLKIN high 6 6 ns (1) This device utilizes a fully static design and therefore can operate with tc(CI) approaching ∞. If an external crystal is used, the X2/CLKIN cycle time is limited by the crystal frequency range listed in Table 5-1 . Table 5-3. CLKOUT Switching Characteristics CVDD = 1.2 V CVDD = 1.6 V CVDD = 1.35 V NO. UNIT MIN TYP MAX MIN TYP MAX D x tc(CI) C4 tc(CO) Cycle time, CLKOUT 20(1) D x tc(CI) (2) 1600(3) 20(1) 1600(3) ns (2) Delay time, X2/CLKIN high to C5 td(CI–CO) 5 15 25 5 15 25 ns CLKOUT high/low C6 tf(CO) Fall time, CLKOUT 1 1 ns C7 tr(CO) Rise time, CLKOUT 1 1 ns C8 tw(COL) Pulse duration, CLKOUT low H - 1 H + 1 H - 1 H + 1 ns C9 tw(COH) Pulse duration, CLKOUT high H - 1 H + 1 H - 1 H + 1 ns (1) It is recommended that the DPLL synthesized clocking option be used to obtain maximum operating frequency. (2) D = 1/(PLL Bypass Divider) (3) This device utilizes a fully static design and therefore can operate with tc(CO) approaching ∞. If an external crystal is used, the X2/CLKIN cycle time is limited by the crystal frequency range listed in Table 5-1 . Copyright © 2009, Texas Instruments Incorporated Electrical Specifications 67 Submit Documentation Feedback Product Folder Link(s): SM320VC5507-EP |
|
链接网址 |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 数据表链接 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |