UM10206

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

User manual

Rev. 01 — 13 June 2006

9 of 12

Philips Semiconductors

UM10206

I2C Demonstration Board 2005-1 Quick Start Guide

Training Board Self Test” allows a

thorough self test to be performed (device, electrical connection and visual check).

You can save the results of the test in a log file.

8.

Upgrades and experimentation

Refer to the UM10207 User Manual for more details on the Win-I2CUSB Lite Software

9.

I2C Demonstration Board 2005-1 upgrades

You can purchase a full version of the GUI, called a Win-I2CUSBDLL kit from The

Boardshop (details are available on the website:

www.semiconductors.philips.com/products/interface_control/i2c). The microcontroller

included operates over the entire address range for all devices with a more powerful

universal mode if you need to communicate with devices or addresses not supported by

the Win-I2C Lite software.

The full version of the GUI is incompatible with the Demonstration Board

hardware adapter v2 card and insert it into the microcontroller socket on the

Demonstration Board.

Periodically daughter cards of new devices will become available and new GUIs

generated for these devices. Alternatively existing GUIs will be enhanced based on

operator feedback. The Win-I2CUSB Lite and Win-I2CUSBDLL kit software includes an

automatic update feature which keeps the software updated to most current GUIs.