UM10206

© Koninklijke Philips Electronics N.V. 2006. All rights reserved.

User manual

Rev. 01 — 13 June 2006

10 of 12

Philips Semiconductors

UM10206

I2C Demonstration Board 2005-1 Quick Start Guide

10. Legal information

10.1

Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. Philips Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

10.2

Disclaimers

General — Information in this document is believed to be accurate and

reliable. However, Philips Semiconductors does not give any representations

or warranties, expressed or implied, as to the accuracy or completeness of

such information and shall have no liability for the consequences of use of

such information.

Right to make changes — Philips Semiconductors reserves the right to

make changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use — Philips Semiconductors products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft,

space or life support equipment, nor in applications where failure or

malfunction of a Philips Semiconductors product can reasonably be expected

to result in personal injury, death or severe property or environmental

damage. Philips Semiconductors accepts no liability for inclusion and/or use

of Philips Semiconductors products in such equipment or applications and

therefore such inclusion and/or use is for the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Philips Semiconductors makes no

representation or warranty that such applications will be suitable for the

specified use without further testing or modification.

10.3

Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.