MCP2021 datasheet(21/52 Pages) MICROCHIP

21 / 52 page

DS22018F-page 21

MCP2021/2/1P/2P

2.0

ELECTRICAL CHARACTERISTICS

2.1

Absolute Maximum Ratings†

VIN DC Voltage on RXD and TXD ........................................................................................................ -0.3 to VREG+0.3V

VIN DC Voltage on FAULT and RESET.........................................................................................................-0.3 to +5.5V

VIN DC Voltage on CS/LWAKE.......................................................................................................................-0.3 to +43V

VBB Battery Voltage, non-operating (LIN bus recessive, no regulator load, t < 60s) .....................................-0.3 to +43V

VBB Battery Voltage, transient ISO 7637 Test 1 ......................................................................................................-200V

VBB Battery Voltage, transient ISO 7637 Test 2a ...................................................................................................+150V

VBB Battery Voltage, transient ISO 7637 Test 3a ....................................................................................................-300V

VBB Battery Voltage, transient ISO 7637 Test 3b ...................................................................................................+200V

VBB Battery Voltage, continuous ....................................................................................................................-0.3 to +30V

VLBUS Bus Voltage, continuous.......................................................................................................................-18 to +30V

VLBUS Bus Voltage, transient (Note 1) ............................................................................................................-27 to +43V

ILBUS Bus Short Circuit Current Limit .................................................................................................................... 200 mA

ESD protection on LIN, VBB (IEC 61000-4-2, 330 Ohm, 150 pF) (Note 3) .............................................. minimum ±9 kV

ESD protection on LIN, VBB (Charge Device Model) (Note 2).............................................................................. ±1500V

ESD protection on LIN, VBB (Human Body Model, 1 kOhm, 100 pF) (Note 4) ....................................................... ±8 kV

ESD protection on LIN, VBB (Machine Model) (Note 2) .......................................................................................... ±800V

ESD protection on all other pins (Human Body Model) (Note 2) ............................................................................ > 4 kV

Maximum Junction Temperature ............................................................................................................................. 150

°C

Storage Temperature .................................................................................................................................. -55 to +150

°C

Note 1: ISO 7637/1 load dump compliant (t < 500 ms).

2: According to JESD22-A114-B.

According to IBEE, without bus filter.

4: Limited by Test Equipment.

† NOTICE: Stresses above those listed under “Maximum Ratings” may cause permanent damage to the device. This

is a stress rating only and functional operation of the device at those or any other conditions above those indicated in

the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods

may affect device reliability.

MCP2021 数据表(PDF) 21 Page - Microchip Technology

MCP2021 数据表(HTML) 21 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52

数据表下载