SI8711CD-B-IM datasheet(6/36 Pages) SILABS

6 / 36 page

Si87xx

Preliminary Rev. 0.5

Table 3. Regulatory Information (Pending)*

CSA

The Si87xx is certified under CSA Component Acceptance Notice 5A. For more details, see File 232873.

61010-1: Up to 600 VRMS reinforced insulation working voltage; up to 600 VRMS basic insulation working voltage.

60950-1: Up to 1000 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working

voltage.

60601-1: Up to 250 VRMS reinforced insulation working voltage; up to 500 VRMS basic insulation working voltage.

VDE

The Si87xx is certified according to IEC 60747-5-2. For more details, see File 5006301-4880-0001.

60747-5-2: Up to 1414 Vpeak for reinforced insulation working voltage.

The Si87xx is certified under UL1577 component recognition program. For more details, see File E257455.

Rated up to 5000 VRMS isolation voltage for basic protection.

CQC

The Si87xx is certified under GB4943.1-2011. For more details, see File number pending.

Rated up to 1000 VRMS reinforced insulation working voltage; up to 1000 VRMS basic insulation working voltage.

*Note: Regulatory Certifications apply to 3.75 kVRMS rated devices which are production tested to 4.5 kVRMS for 1 sec.

Regulatory Certifications apply to 5.0 kVRMS rated devices which are production tested to 6.0 kVRMS for 1 sec.

For more information, see "9.Ordering Guide" on page 20.

Table 4. Insulation and Safety-Related Specifications

Parameter

Symbol

Test Condition

Value

Unit

SOIC-8

DIP8

SDIP6

LGA8

Nominal Air Gap (Clearance)

L(IO1)

4.9 min

7.4 min

8.0 min

9.6 min

Nominal External Tracking

(Creepage)

L(IO2)

4.8 min

8.0 min

10.0 min

Minimum Internal Gap

(Internal Clearance)

0.016

Tracking Resistance

(Proof Tracking Index)

PTI

IEC60112

600

Erosion Depth

0.031

Pending

0.021

Resistance (Input-Output)*

RIO

1012



Capacitance (Input-Output)*

CIO

f = 1 MHz

111

*Note: To determine resistance and capacitance, the Si87xx is converted into a 2-terminal device. Pins 1–4 (1–3, SDIP6) are

shorted together to form the first terminal, and pins 5–8 (4–6, SDIP6) are shorted together to form the second terminal.

The parameters are then measured between these two terminals.

SI8711CD-B-IM 数据表(PDF) 6 Page - Silicon Laboratories

SI8711CD-B-IM 数据表(HTML) 6 Page - Silicon Laboratories

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

数据表下载